User's Manual

11 Event Marker Input and 1PPS Output
100 Trimble R7/R8 GPS Receiver User Guide
Trimble R7 GPS Receiver Operation
3. To start the GPS Configurator software, click , then
select Programs / Trimble / GPS Configurator / GPS Configurator.
The GPS Configurator dialog appears and the software
automatically connects to the receiver.
4. Select the Serial outputs tab.
5. Select the 1PPS (port 2 only) check box.
6. If you want ASCII time tags enabled, select the check box and
choose an output port.
7. Click
Apply.
The GPS Configurator software sends the new configuration
information to the receiver, and the receiver starts to generate
1PPS output on Port 2.
8. Click
OK to exit the GPS Configurator software.
The software disconnects from the receiver.