User's Manual

Unit Setup

1. Charge the PowerBoot Module

The PowerBoot Module

that contains the batteries is shipped

detached from the unit. Before you insert the PowerBoot into the

unit, you should charge it. The AC charger has outlet adapters to fit

almost every electrical outlet. Connect the appropriate outlet adapter

to the AC charger. Plug the charger into

an electrical outlet and plug the barrel

end of the charger into the PowerBoot.

Charge at least 12 hours before using.

Warning! Be sure to always use the charger included with your

unit. Use of other chargers will void the product warranty.

2. Attach the PowerBoot Module

To attach the PowerBoot, use a

screwdriver or the flat head of the supplied

stylus to turn the latches counter-clockwise

until arrows point downward towards the

I/O ports on the PowerBoot. While

applying pressure down and forward on

the PowerBoot, firmly slide it onto the

main unit as shown.

Lock the PowerBoot latches by turning

them clockwise one half turn until the

arrows on the latches point away from the

I/O ports.

3. Attach the hand strap

Hold the hand strap clip at a 45-degree angle

and push the clip onto the bracket. Repeat the

process with the other end of the hand strap.

latches