User's Manual

22
Installing additional software on your unit
The unit can run third-party software designed for Microsoft
Windows Mobile 5.0. However, not all Windows Mobile third-
party programs are screen-rotation-aware and therefore may not run
properly in a portrait environment. To allow these programs to run
correctly, the screen orientation can be changed in Settings /
System / Screen.
Most third-party software is installed by running a setup program on
the PC while the unit is connected with ActiveSync. Follow the
setup instructions that came with your software. If prompted by the
installation wizard, perform a reset to complete the installation.
Caring for Your Unit
Cleaning the unit
Clean the unit with a soft cloth dampened with either water or a
diluted mild detergent. Do not use any chemical cleaners and do
not put the unit in the dishwasher.
Care of the touchscreen
Use only the included stylus or other devices specifically designed
for use with touchscreens. The use of ballpoint pens, nails or other
sharp objects to operate the touchscreen will scratch and/or damage
the unit. Abrasives may scratch touchscreens. Keep the touchscreen
clean by gently wiping the display, using a soft cloth dampened
either with clean water or glass cleaner. Do not apply any cleaner
directly to the display. Do not use any abrasive cleaners.
Use the screen protectors included with the unit to keep the
touchscreen clean and protected. To apply a screen protector, first
clean the display thoroughly. Peel the backing from the screen
protector. Align the edge, and then drop the remainder onto the
display. Use a credit card, if necessary, to squeeze the air from
underneath the screen protector.