User's Manual

26
to unit; unit to/from a PC) are discussed in the following sections.
Note that you cannot use Bluetooth to create an ActiveSync
connection between the unit and your PC. ActiveSync Bluetooth
connections are not supported.
Bluetooth file transfer between two units
It is possible to transfer files from one unit to another over a
Bluetooth connection. Choose Start / Settings / Connections /
Bluetooth, and confirm that Bluetooth is enabled on both units.
Confirm that the unit that will receive the file is discoverable.
Launch File Explorer on the unit that will send the file. Browse to
the file to be sent, and touch and hold on it. Choose “Beam File”
from the menu that appears. Wait for several moments while the
sending unit searches for Bluetooth devices in the vicinity.
Select the receiving unit from the
list, and tap Tap to send. Wait for a
few moments while the file is
transferred. The receiving unit will
open a window asking whether you
want to accept the file. Choose Yes.
The file will be saved in the My
Documents folder on the unit.
Bluetooth file transfer from a unit to a PC
It is possible to transfer files from a unit to a Bluetooth-enabled PC
over a Bluetooth connection. These instructions are based on a PC
running the Windows XP operating system with Service Pack 2 and
a USB Bluetooth dongle. The native Microsoft Bluetooth support is
used; there are no drivers installed for the dongle.
On the unit, choose Start / Settings / Connections / Bluetooth, and
confirm that Bluetooth is enabled. It is not necessary for the unit to
be discoverable.