User's Manual

26
Flash: Tap On when a flash is needed for taking the picture.
(This setting is only available in camera mode.)
Full Screen: Tap to make the picture or video full screen. Tap the
screen to return the menus. Tap Full Screen again to stop this
function.
Options: Tap to make changes.
- General: The picture can be resized for e-mailing and the
settings can be changed to rotate pictures to the right or left.
- Slide Show: Change settings to optimize for viewing.
- Camera: Change settings for saving files.
- Video: Change settings for audio capture and time limits.
GeoTagging: Settings that can be changed while using the GPS with
the camera. (This setting is only available in camera mode.)
- GeoTagging: Choose where the tagging is done:
•
Disable: turns off GeoTagging.
•
EXIF Data only: EXIF data is stored in the image data only.
•
Embed Text Only: shows the location stamp on the image.
•
Both: EXIF is stored in the image data and the location
data is shown on the image.
NOTE: The GPS will continue tracking satellites if
GeoTagging is turned on. Either “Acquiring Satellites” or
“GPS Ready” will be shown above the preview image
when the viewfinder is not in standby.
- Font: Set the size, font, color, location and format of the image
embedded location stamp.
- GPS Power: Determines when the GPS is turned on. The
default is Auto Power off with a timeout of 5 minutes to
conserve battery power. You can choose a timeout value of 1,
5, 10, 20, 40 or 60 minutes.
Effects: Flip/Rotate changes the direction the picture is taken and
Sound settings can be muted for shutter sound and auto focus.
(This setting is only available in camera mode.)
Auto Focus: Choose the Macro setting to change the focus and
flash to take close shots; choose the Infinite setting to change
the focus and flash to take long distance shots.
(This setting is only available in camera mode.)