User's Manual

4
matched by other Bluetooth equipment). It can be revised to suitable value according
to different situations.
6. LEG DEMONSTRATION
1) LEG Demonstration
As you can see from this picture, it is RS232 serial adapter, leg 1 is the power, leg
five is the stuff connecting earth. Usual voltage keeps 4.9V, and TTL signal keeps 5V.
When the module keeps the condition of being not connecting, leg 9 outputs lower
electricity. And it can reach to above 5V when it connects. Please let the leg 6 which
is a leg of cancel address connects low voltage usually. If you want to cancel address
and fit again, you should give it a high voltage.
2) Specification for Dongle
The module process edition number is 2.7. if you want to set the parameter,
please use the edition of 2.x set tool. And the specific using way you can find it in 2.x
edition using demonstration of set tool. You also should make the module connecting
to computer, and connect plug.
Module acquiescence parameter:
Usual voltage: 5v to 14v
input or output signal voltage: +/-5v
bond rate ： 38,400
Machine name RxBt01
Relationship: be subordinate to machine
Identity right: no
Corded or not: no
leg definition followed:
Pin1
Pin2 TxD
Pin3 RxD
Pin4 NC
Pin5 GND