User's Manual

Call Sign: CALL SIGN
Owner: (there is no default)
Low Voltage Turn Warning 10 V
Low Voltage Turn Off 9 V
Turn Off LCD Backlight No
Turn Off LCD Delay After 20 seconds
Serial Interface
PC Baud Rate: 38400
Parity: None
Soft Break Disabled: Yes
Protocol Mode: Transparent with EOT Timeout
EOT Timeout: 50
EOT Character: (not used)
Security Code: 00000000
Table 1 - ADL Vantage Factory Defaults
Setting Up the ADL Vantage
The Standard ADL Vantage Radio Kit
The Standard ADL Vantage Radio Kit consists of the following:
• ADL Vantage radio
• Wall/mains power supply
• Wall plug with adaptor set
• Programming cable
• ADL Vantage CD containing:
o ADL Vantage User's Guide
o ADLCONF User's Guide
o ADLCONF Software
o PCC Range Estimator
To configure the radio with ADLCONF software,
• Connect the power supply to the main wall current
• Connect the programming cable to:
o The power supply
o The ADL Vantage radio
o Your PC
• Turn on the radio
• Launch ADLCONF software and refer to the section of the ADLCONF User’s Guide on
connecting the program to your radio.
To operate your ADL Vantage radio in the field you will need an antenna, a portable power
supply and a cable to connect to a data source such as a GNSS receiver. Pacific Crest