User's Manual

Appendix B - Pin-outs and Connectors
ADL Vantage
The ADL Vantage data receptacle is a 0-shell, 5-pin circular connector. For a mating plug, we
recommend LEMO PN FGG.1B.305.CLAD.72Z. Refer to Table 4 and Figure 5 for pin assignments
and orientation. Figure 5 shows a rear view of the pin-outs (looking from behind the
connector).
Figure 5 – ADL Vantage Data/Power Connectors
Table 4 - ADL Vantage Base and Rover Pin
Assignments
Antenna
The ADL Vantage antenna connector is a TNC female. For a mating plug, we recommend
Amphenol-brand connectors. Use only high quality 50 Ω impedance cable for the antenna
connection.
Most ADL Vantage antennas use industry-standard NMO connectors. The impedance of all
ADL Vantage antennas is 50 Ω.
Connector Manufacturer Contacts
Contact LEMO at http://www.lemo.com
Contact Amphenol at http://www.amphenol.com
Pin
No.
Description
1 Power: 9-30 VDC Input
2 Ground for Power
3 RX (DTE)
4 Signal Ground
5 TX (DTE)