User's Manual

Pacifi c Crest
ADL Vantage/ADL Vantage Pro Users Guide
3
To confi gure the radio with ADLCONF so ware:
• Connect the power supply to the wall/mains current
• Connect the programming cable to:
 The power supply
 The ADL Vantage/ADL Vantage Pro radio
 Your PC (If your PC does not have a serial port, you may use a serial-to-USB adaptor)
• Turn on the radio
• Launch ADLCONF so ware and refer to the sec on of the ADLCONF User’s Guide on
connec ng the program to your radio. In most cases, you just need to click ADLCONF’s
Con nect bu on.
To operate your ADL Vantage/ADL Vantage Pro radio in the fi eld you will need an antenna, a portable
power supply and a cable to connect to a data source such as a GNSS receiver. Pacifi c Crest and its au-
thorized dealers can provide you with everything you need including a tripod accessory kit and a ba ery/
charger kit.
Tripod Mounts
Each ADL Vantage includes a tripod clip on the rear of the radio (see Figure 1). Insert the clip into a slot
on the tripod.
Figure 1 – ADL Vantage Tripod Clip
Each ADL Vantage Pro includes a high-impact polymer handle with built-in tripod clip (see Figure 2).
Insert the clip into a slot on the tripod.
Figure 2 – ADL Vantage Pro Handle with Tripod Clip