User's Manual

Pacifi c Crest
ADL Vantage/ADL Vantage Pro Users Guide
8
Func on Descrip on Parameter Choices
Device Status
Displays radio status and iden fi ca on informa on Ba ery status
Owner name
Call sign
Modula on type
Channel bandwidth
Transmi er status
Firmware version
Channel / Freq
Displays/selects channel number & receive frequency
Channel 01 and frequency (MHz)
Channel 02 and frequency (MHz)
Etc.
Ch TX Freq
Displays TX freq (if diff erent from the channel’s RX freq)
Channel No. & frequency (MHz)
Data Protocol
Displays/selects data protocol type
Trans EOT (End of Transmission)
Trans EOC (End of Character)
Packet Switched
TRIMTALK 450S
TRIMMARK II/IIE
TT450S (HW)
TRIMMARK 3
SATEL®
Trans FST
Radio Link Rate
Displays/selects bit rate for radio transmission/recep on 4800
8000
9600
16000
19200
Repeater Mode
Sets the radio to be a repeater (non-Trimble) protocols)
Off (Not a repeater)
On (Is a repeater)
Opera on Mode
Sets the radio to be a repeater (Trimble protocols)
Base/Rover
Base w/ One Rpt
Base w/Two Rpt
Repeater1
Repeater2
Sensi vity
Displays/selects radio squelch level
High (Rover)
Moderate
Low (Base)
Transmit Power
Displays/selects transmi er power level (in Wa s)
Low Power