User's Manual

Pacific Crest Corporation ADL Access User Guide – Dealer Version Page 25 of 28
b. Exporting a Channel Table
After you created a channel table, you can save it as a *.frq file to your PC for
archiving or uploading into other radios. To export it, click the Export button and
identify a file name and location for the file.
c. Importing a Channel Table
You can configure a radio using an existing channel table created by ADL Access
by clicking the Import button and selecting the desired *.frq file.
d. Setting Maximum RF Output Power
End users can select various RF power output levels for their ADL transceivers
using the TX Power field on the Radio Link screen. The maximum power level,
however, is often established by national governments, and exceeding this power
level can be prohibited by law. Depending on local law, it may be the dealer’s
responsibility to set this maximum power output prior to delivery of the
transceiver to the end user. To do this, click the Max Power Output button on the
lower left of the Dealer screen: