User's Manual

Trimble Jena GmbH
Carl-Zeiss-Promenade 10
07745 Jena
Germany
(3) This Transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
(4) Changes or modifications to this unit not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
6.3 RF exposure warning
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment.
The equipment must not be co-located or operating in conjunction with any other antenna or
transmitter.
6.4 User Information
Caution: Any changes or modifications not expressly approved by the party responsible for
compliance could void the user`s authority to operate this equipment.
This radio transmitter Trimble Comm Board Tornado module has been approved by FCC to
operate with the Pulse W3334B0150 antenna, with the maximum permissible gain of 4 dBi in
the 2.4 GHz band, and 5.5 dBi in the 5 GHz bands. Use of an antenna having a gain greater
than the maximum gain specified, are strictly prohibited for use with this device and will void
the user's authority to operate the equipment.
The host product incorporating this radio module shall be labelled as follows to be in
compliance with FCC regulations:
• “Contains FCC ID: YK5-73350047”
• “This device may not cause harmful interference and must accept any interference
received, including interference that may cause undesired operation” - This
statement can be in the user manual of the final product in case it is impracticable to
place it on the label.
6.5 ETSI Adaptivity Declarations of Conformance
The Trimble Comm board Tornado is an LBE device with the following declarations:
• Operates as a Supervising Device that does not make use of note 1 or note 2 of
Table 7 EN 301 893 clause 4.2.7.3.2.4.
o The maximum Channel Occupancy Time (COT) is within 6 ms for Priority
class 2.
o The maximum Channel Occupancy Time (COT) is within 6 ms for Priority
class 1.
• Operates as both an Initiating Device and a Responding Device.
• Implements all 4 Priority Classes: 1, 2, 3, and 4
• Conforms to Option 1 of Energy Detection Threshold as described in EN 301 893
clause 4.2.7.3.2.5.
o Conforms only to IEEE 802.11 2016 clause 17, clause 18, and clause 21.
o Complies with the Initiating Device Channel Access Mechanism requirements
contained in EN 301 893 clause 4.2.7.3.2.6.
o Complies with the Responding Device Channel Access Mechanism
requirements contained in EN 301 893 clause 4.2.7.3.2.7