User's Manual

2


37843‐IOModule
PinLayout
J11 – Baseboard 12-pin
Error! Objects cannot be created from editing field codes.
Pin Signal Name Input/
Output
J11.1
V
IN Input
J11.2 PROG_IN_3 Input (+)
J11.3 PROG_OUT_2 Output
J11.4 PROG_OUT_1 Output
J11.5 PROG_IN_1 Input (+)
J11.6 LF_ANT125_OUT_1 Output
J11.7 RELAY_20A_1 Output
J11.8 RELAY
_
20A_2 Output
J11.9 CANL In/Out
J11.10 CANH In/Out
J11.11 GND
J11.12 LF_ANT125_IN_1 Input
J13 – Baseboard 14-pin
Error! Objects cannot be created from editing field codes.
Pin Signal Name Input/
Output
J13.1 PROG_OUT_4 Output
J13.2 PROG_IN_2 Input (+)
J13.3 PROG_OUT_3 Output
J13.4 LF_ANT125_OUT_3 Output
J13.5 LF_ANT125_OUT_2 Output
J13.6
J13.7
J13.8 12V_REG Output
J13.9 PROG_IN_4 Input (+)
J13.10 GND
J13.11 LF_ANT125_IN_3 Input
J13.12 LF_ANT125_IN_2 Input
J13.13 GND
J13.14 HF_433MHZ_ANT Input
J1 – Programmable Inputs & Relay Outputs Group 1
Error! Objects cannot be created from editing field codes.
Pin Signal Name Input/
Output
J1.1 PROG_IN_101 Input
(
-
)