User's Manual

I
Appendix: Installation and Mounting e-FOB
System
Contact TriMark for specific mounting details, such as drawings,
placement suggestions, mounting hardware, etc.
General Mounting Guidelines:
The RF receiver should be placed in an interior location that does not
shield RF signals. You may need to try multiple locations to optimize
reception. The antennae must be left fully extended and exposed.
Minimize shielding from metal enclosures.
Wiring color code tables and diagrams
The following tables and diagrams are provided to show color-coded wire
and pin assignments for the e-FOB system. Connect all wires before
plugging module into wiring harness.
RF RECEIVER
II
WIRE COLORS
CONNECTOR 1: 4-PIN HARNESS
--
--
1
Yellow
Ignition Input
2
Black
Ground Input
3
Red
Power (+12V)
4
WIRE COLORS
CONNECTOR 2: KEYPAD HARNESS
Integrated Harness
WIRE COLORS
CONNECTOR 3: 2-PIN HARNESS
Green/White
Lock Input (-)
1
Blue/White
Unlock Input (-)
2
WIRE COLORS
CONNECTOR 4: 14-PIN HARNESS
White/Blue
(-) Security Trigger Input 3
1
Green/Black
Armed Output (-500 mA)
2
White/Yellow
Starter Kill Output (-500 mA)
3
Black/White
Lights Output (-500 mA)
4
Gray/White
Horn Output (-500 mA)
5
White/Pink
(-) Security Trigger Input 1
6
Gray
Siren Output (A/C)
7
Purple/Black
Aux. 2 Output (-500 mA)
8
Purple/White
Aux. Output (relay 15A)
9
Blue/White
2
nd
Unlock Output (-500 mA)
10
Blue/Black
3
rd
Unlock/Staggered Lock (-500mA)
11
White
Parking Lights (relay 15A)
12
White/Purple
(+)Security Trigger Input 2
13
Gray/Black
Siren Output (A/C)
14