User's Manual

e-ASK CAN DIP Switch Configuration –

• DIP switches 1-3:

The settings of DIP switches 1-3 define CAN address of the IO RF receiver

module. The setting a unique address is required if multiple modules are

used on CAN network. If only 1 module is used on network then all DIP

switches should be set to default ON position.

• DIP Switch 1: On

• DIP Switch 2: On

• DIP Switch 3: On

• DIP switches 4-6:

The setting of DIP switches 4-6 define configuration of the IO RF receiver

module. Different configurations of provide different functionality for

keypad and interior switches. Spartan’s setting is as follows:

• DIP Switch 4: On

• DIP Switch 5: Off

• DIP Switch 6: Off

• DIP switch 7:

The setting of DIP switch 7 defines the type of remote fob transmitter,

either standard fob or cargo fob. Spartan would have this DIP switch on.

• On: Cargo fob

• DIP switch 8:

The setting of DIP switch 8 defines the type of CAN protocol, either RV-C

or SAE J1939. Spartan would have this DIP switch on.

• On: SAE J1939

Additional Features

Dome Light Activation

The dome light is activated for a timed duration (20 seconds) whenever

the system is unlocked from keypad or FOB transmitter.

e-PAD Anti-tamper Deactivating Feature

After repeated attempts to enter incorrect codes (20 button presses

without enabling), the keypad enters an inactive mode that disables button

for 1 minute. This helps prevent undesired access by entering random