User's Manual

Assign New Access Codes

With a valid authority code (see pages 4 and 9), an access code can be

programmed with the following instructions.

1. Press the (5/6) button for 5 seconds, the keypad will beep. The

backlighting LED of the keypad will flash indicating the learn

mode.

2. Enter in the 5-digit authority code (see pages 4 and 9). Keypad will

provide a long beep that will stop after you have defined an

access number.

3. Press and release the button that corresponds to the access

number. For example, press (1/2) button for access #1 and press

(3/4) button for access #2. During this activity you are defining 1 of

5 access numbers. A subsequent code will be assigned to this

access #. The keypad will provide a confirmation beep after this

single button press.

4. Enter in your new 5-digit access code. The keypad will provide

confirmation beeps.

5. Re-enter new access code. The keypad will provide confirmation

beeps.

Repeat process to assign additional access codes.

Up to 5 different access codes can be assigned at one time. As additional

access codes are defined, pre-existing access codes are overwritten. For

example, if a new access code is assigned for access #3, the previous

access #3 code is no longer valid.

The following area can be used to document the access code

assignments.

Access

User Name

Digit