User's Manual

Spectrum Research
& Testing Lab., Inc.
No. 101-10, Ling 8,
Shan-Tong Li, Chung-Li
City, Taoyuan, Taiwan,
R.O.C.
TEST REPORT
Reference No.: A06033011
Report No.: FCCA06033011
Page:
5 of 20
Date: May 12, 2006
FCC ID: TV2EFOBI
2.4 DESCRIPTION OF SUPPORT UNIT
The EUT was configured by the requirement of ANSI C63.4 and CISPR 22. All
interface ports were connected to the appropriate support units via specific cables.
The support units and cables are listed below.
NO DEVICE BRAND MODEL # FCC ID/DOC CABLE
1 N/A
NOTE: For the actual test configuration, please refer to the photos of testing.
3. DESCRIPTION OF APPLIED STANDARDS
The EUT is a kind of wireless product and according to the specifications provided by
the applicant, must comply with the requirements of the following standards:
47 CFR Part 15, Subpart C
All tests have been performed and recorded as per the above standards.
4. CONDUCTED EMISSION TEST
The test item was not performed, because the EUT uses 3Vdc battery as power
source.