User's Manual
Trilogik Technologies inc.
8061, rue Burgos,
Quebec (QC), Canada, G2C 0H3 V2.0, 2019-08-01
ventes@trilogik.ca
www.trilogik.ca, (418) 476-1234 1
User Manual – RF Module MB001-A
Note: this manual describes the limitations of the RF Module MB001-A.
Product capabilities
The MB001-A is an RF module communicating over the ISM band, capable of doing fixed frequency mesh network (not
frequency hopping). It can be used in both “master” and “slave” configuration. The master is responsible for
synchronizing all the slaves in a given mesh network. Once synchronized, all slaves will transmit sensor data towards
the master at periodic interval. The master can then be used to send all sensor data to a cloud based application, so
that users can access data history.
Circuit Description
The circuit of the MB001-A consists of an MCU with an integrated RF transceiver, along with some
peripherals:
1. Analog inputs
2. Digital inputs/outputs
3. 1 uart (used in master communication with cellular modem)
4. Onboard analog temperature sensor
The MB001-A can operate in the range 1.0VDC to 5VDC.
Configurations
The MB001-A RF Module is intended to operate in one of the following configurations:
Master mode:
Config-1: Cellular Gateway (Master mode)
Slave mode:
Config-2: Device with configurable IOs
The MB001-A can be configured using the programming port J7, via a PC terminal using the following
settings: