Installation Guide

Notice: The contents of this document are proprietary and confidential and the property of Trilliant Holdings Inc., its subsidiaries, affiliates, and/or
licensors. This document is provided subject to the confidentiality obligations set forth in the agreement between your company and Trilliant. The contents
may not be used or disclosed without the express written consent of Trilliant.
14
Installation Guide for SecureMesh WAN
®
Gateway 2 - PL-0073A
Chapter 3. Prepare for installation
This chapter provides information about the steps to prepare the site and the GATE-
2000 for installation.
Tools
Gather the following tools before installing the GATE-2000:
l Magnetic level, such as McMaster-Carr Magnetic-backed bull’s eye level, part
number 3329A31.
l Screwdrivers: Phillips head, sizes #2 and #3
l Screwdriver: Flat blade, medium size
l Xacto knife
l Diagonal cutters
l 5/16" socket wrench or nut driver
l 3/8" socket wrench or nut driver
l 7/16" socket wrench or nut driver, or an adjustable open-end wrench
l For the gateway configuration: a test computer with a 2.4 GHz WiFi adapter, a
terminal emulation program, a network interface card, and a web browser (a
laptop is recommended for convenience).
Location requirements
Select a location that meets the following access guidelines:
l Conforms to all local electrical codes and ordinances.
l Either owned by the utility or where the utility has access rights.
l Able to provide adequate power.
l At least 18 ft (5.5 m) above ground level, although radio performance and
coverage typically improve as the height increases.