Installation Guide

Notice: The contents of this document are proprietary and confidential and the property of Trilliant Holdings Inc., its subsidiaries, affiliates, and/or
licensors. This document is provided subject to the confidentiality obligations set forth in the agreement between your company and Trilliant. The contents
may not be used or disclosed without the express written consent of Trilliant.
13
Installation Guide for SecureMesh WAN
®
Gateway 2 - PL-0073A
Supplies
The following supplies are required for installation:
l Self-fusing rubber insulation and sealing tape, such as Scotch
®
130C or 2228
Rubber Mastic Tape
l Electrical tape
l Ground wire, 10 AWG or larger, long enough to connect the gateway to the
primary ground point on the structure and to earth ground
l Two 0.5" wide (13 mm) hose clamps (used for the Citel surge suppressor)
l Grounding clamp, size to fit the mounting pole
l Cable ties or Velcro wraps
l RTV silicone
Spare/replacement parts
The GATE-2000 is not field-serviceable.
Warning: If the GATE-2000 is damaged or a hardware fault or failure
occurs, it must be replaced.