Installation Guide

Notice: The contents of this document are proprietary and confidential and the property of Trilliant Holdings Inc., its subsidiaries, affiliates, and/or
licensors. This document is provided subject to the confidentiality obligations set forth in the agreement between your company and Trilliant. The contents
may not be used or disclosed without the express written consent of Trilliant.
38
Installation Guide for SecureMesh
®
WAN Extender 2 - PL-0072A
Figure 21: XTEN-2000 power injector and test computer
Extender parameters
1.
Using TeraTerm, SecureCRT, or a similar terminal emulator program, establish
a Telnet session to the Extender using its configured IP address.
The default IP address is 192.168.0.2.
2. When prompted, enter the CLI password. The default password is public.
3. Refer to the Command Line Reference (CLI) Guide for a list of parameters that
can be configured.