User Manual

SkyPilot SkyAccess DualBand Installation 37
configuration, the device may be unable to connect to the network
until the device has been fully configured as described in “Configuring
the SkyGateway/SkyExtender” on page 30.
Figure 3-17. LED lights on the SkyGateway/SkyExtender base
The tables that follow provide detailed descriptions of device states
indicated by the LED lights. When both LED lights are lit and steady,
the SkyGateway or SkyExtender is successfully connected to the
wireless network.
You can observe the startup progress by attaching a laptop to the
device’s serial port, starting a terminal emulation program, and
rebooting the device. For more information about accessing a
SkyGateway or SkyExtender via a serial connection, refer to the
SkyPilot Command-Line Interface Reference, available from the
SkyPilot website at www.skypilot.com/support/
.