User Manual

SkyPilot SkyAccess DualBand Installation 33
Figure 3-13. Providing power to the SkyGateway/SkyExtender
2 If you’re connecting a DualBand, skip this step. Likewise, if you’re
connecting a SkyExtender that will operate solely as a repeater on
the wireless mesh network, skip this step as a data connection is not
required.
Otherwise, connect the device to a WAN (for a SkyGateway) or a
PC/LAN (for a SkyExtender that’s also providing local access to the
wireless network).
NOTE DualBands don’t contain an Ethernet interface and can’t
detect any device connected to the power injector port
labeled “Computer”.
For a SkyGateway, connect a second Ethernet cable from the power
injector port labeled “Computer” to a router or data switch that
connects to the WAN or Internet (see Figure 3-14).