User Manual

SkyPilot SkyAccess DualBand Installation 32
Powering Up
To supply power to the SkyGateway or SkyExtender, perform the
procedures described in this section.
Making Power and Network Connections
To supply power to the SkyGateway or SkyExtender, perform the
procedures described in this section.
To make connections:
1 Attach the power supply for the SkyGateway or SkyExtender.
a. Connect the AC power cord to the AC adapter, and plug it
into an AC outlet.
b. Connect the Ethernet cable to the port labeled “CPE” on the
power injector.
IMPORTANT Be careful not to plug the Ethernet cable
connected to the SkyGateway or SkyExtender into the
port labeled “Computer.”
c. Plug the AC adapter into the power injector.