User Manual

SkyPilot SkyAccess DualBand Installation 26
a. Slide the port cover over the weather gasket and secure it to
the base of the unit with the provided screws, making sure
the Ethernet cable passes through the cutout in the cover.
Figure 3-5. Attaching the cover to the base
b. Use a tie wrap (provided in the accessory kit) to ensure a
tight seal for the weather gasket. Cut off any excess tie
wrap.
Figure 3-6. Sealing the weather gasket
4 Secure the cabling.
Use sturdy cable ties or Velcro wraps (not included) to secure all the
cabling against strain, especially if the installation is subject to high
winds.