User Manual

SkyPilot SkyAccess DualBand Installation 23
2 Use the provided mounting bracket and appropriate length 1/4"
Number 28 screws (provided in the accessory kit) to attach the
SkyGateway or SkyExtender to the mounting pole (see Figure 3-1).
The 1" screws accommodate a pole diameter of 1 1/2", and the 2"
screws accommodate a pole diameter of 2 1/8".
NOTE If the device is not level, performance may be degraded.
Figure 3-1. Attaching weather gasket and metal cover
Cabling
Ethernet cabling provides power and data connectivity for the
SkyGateway or SkyExtender. Serial cabling provides connectivity for
troubleshooting and local configuration—connectivity that’s beneficial
and cost-effective for locations where access to the device is difficult,
such as cell towers. To cable the device for both Ethernet and serial