User's Manual

SkyPilot SkyAccess DualBand Installation 23
Figure 3-3. Attaching tie wraps to the gasket neck
Powering on the SkyConnector
Before mounting the SkyConnector, first power on the unit so that you
can use the onboard LEDs to determine optimal placement.
To power on the SkyConnector:
1 Attach the power supply
a. Connect the AC power cord to the AC adapter, and plug it
into an AC outlet.
b. Connect the Ethernet cable to the port labeled “CPE” on the
power injector.
NOTE Be careful not to plug the Ethernet cable connected to the
SkyConnector into the port labeled “Computer.”