User's Manual

SkyPilot SkyAccess DualBand Installation 22
a. Press the CAT5 cable into the gasket and insert the gasket
into the housing, taking care not to twist or place
unnecessary force on the RJ-45 connector.
b. Fit the metal cover over the weather gasket and secure it
with the four machine screws supplied in the accessory kit
(Figure 3-2).
Figure 3-2. Attaching weather gasket and metal cover
3. Attach the tie wraps to the neck of the weather gasket and tighten
them so that they slightly depress the neck (Figure 3-3).
The tie wraps provide relief from cable strain and ensure a fully
weatherproof seal.