User's Manual

SkyPilot SkyAccess DualBand Installation 21
easier if the device is more accessible. For information about
configuration, see “Configuring the SkyConnector” on page 20.
Cabling the SkyConnector
Ethernet cabling provides power and data connectivity for the
SkyConnector. This section provides instructions for attaching CAT5
cable to the device.
To install CAT-5 cabling:
1 Terminate the appropriate grade and length of CAT-5 cable with an
RJ-45 connector, and plug it into the RJ-45 port on the back of the
SkyConnector.
Make sure the fit is snug so that the cable doesn’t interfere with the
weather gasket.
Figure 3-1. Connecting CAT5 cable to the SkyConnector
2 Insert the weather gasket and secure the metal cover.