User's Manual

SkyPilot SkyAccess DualBand Installation 26
Connecting to the wireless network
After mounting the SkyAccess DualBand, set up a connection to the
wireless network via a local computer or LAN. Once connected, a
subscriber can use the wireless network to gain access to Internet
services and applications.
Connection to the SkyAccess DualBand is accomplished with Ethernet,
or through the onboard access point to establish a wireless connection.
Connect to the wireless network with
Ethernet
 Connect the device to a computer or LAN (for a SkyAccess DualBand
that’s providing Internet/WAN access to the mesh network).
Connect a second Ethernet cable from the power injector port labeled
“Computer” to a personal computer or router/data switch providing a
connection to a LAN.