User's Manual

SkyPilot SkyAccess DualBand Installation 6
Audience and Purpose
This guide provides directions for installing and setting up a SkyPilot
SkyConnector Outdoor device that can provide access to users of a SkyPilot
wireless mesh network.
This guide assumes administrator-level knowledge of IP networks and a
familiarity with configuring wireless devices.
How This Guide Is Organized
This guide is organized as follows:
• Chapter , “ 1,” provides an overview of the SkyPilot Networks solution,
describes the SkyPilot devices, and then illustrates how they combine to form
a mesh network.
• Chapter , “2,” provides the information you need before you begin your
installation.
• Chapter , “ 3,” provides instructions for the physical installation of the
SkyConnector Outdoor as well as background information about configuration
and references to associated procedures.
• Appendix , “ A,” provides direction on protecting your SkyPilot device with
proper grounding and surge protection.
• Appendix , “ Error! Reference source not found.,” provides the FCC radio
frequency interference statements for the SkyConnector Outdoor.
• Appendix , “ C” provides technical specifications for the SkyConnector
Outdoor.