User's Manual

SkyPilot SkyAccess DualBand Installation 28
Figure 9. Connecting a SkyAccess DualBand to a computer
Connect to the wireless network via a Wi-
Fi connection
1 From a Wi-Fi/WPA-PSK capable computer within operating range of
the access point, open the Network control panel and set up a
wireless connection with the IP address 192.168.0.10 and Netmask
255.255.255.0.
2 From the Network Connection control panel choose the default SSID
provided with the SkyAccess DualBand— SkyAccessDualBand.
3 At the password prompt, enter publicpublic.
4.9 GHz