User's Manual

SkyPilot SkyAccess DualBand Installation 18
The site survey process should be ongoing. To verify that a site is
relatively free of interference, make site audits every 6 to 12 months,
scheduling regular maintenance visits to coincide with the site audits.
Cabling the SkyAccess DualBand
Ethernet cabling provides both power and data connectivity for the
SkyAccess DualBand.
The section provides instructions for attaching CAT5 cable to the device.
1 Terminate the appropriate grade and length of CAT5 cable with an
RJ-45 connector and plug it into the RJ-45 port on the back of the
SkyAccess DualBand.
Figure 3. Connecting CAT5 cable to the SkyAccess DualBand
Make sure the fit is snug so that the cable does not interfere with the
weather gasket.
4.9 GHz