User's Manual
SkyPilot SkyAccess DualBand Installation 15
SkyPilot also offers accessories, including a tilt mount for optimizing your
SkyAccess DualBand installation. For more information, contact a
SkyPilot sales representative.
NOTE The 5.8 GHz antenna in integrated into the dualband connector
housing. The 2.4GHz antenna is the external antenna.
+
Before starting installation, you also need the following:
For basic mounting: A Phillips screwdriver
For pole mounting:
A magnetic level (optional)
A secured steel pole between 1.13" (2.87 cm) and 1.37"
(3.48 cm) in diameter
For network cabling:
A spool of CAT5 network cable (shielded cable is
recommended)
NOTE/#% % ) 1%
(. /2/(,
3(#% %
). 22/&45&, ,
Ethernet crossover cable (for connecting to data switch or
router)
RJ-45 connectors (connectors without a protective “boot”
are recommended)
RJ-45 crimping tool
For wireless mesh network configuration: A laptop with a Telnet client
application and a 10/100bT Ethernet network interface card
Setup information for the access point: