User's Manual

NOTE Ethernet cabling must comply with the requirements of
NEC/CEC codes for outdoor CAT5 cables. The outer jacket
of the cabling must be clearly marked as CAT5e per
ANSI/TIA/EIA-568-B.2.
Ethernet crossover cable (for connecting to data switch or router)
RJ-45 connectors (connectors without a protective “boot” are
recommended)
RJ-45 crimping tool
For configuration: A laptop with a Telnet client application and a 10/100bT
Ethernet network interface card
SkyPilot SkyConnector Installation 13