Installation Instructions

54 | Appendix D Pinouts
DB-9 Adapter
Table D-2 lists connecting pins between the SkyPilot Gateway Pro “CPE” port
(RJ-45 connector) and a standard computer DB-9 serial port.
The following figures show the connection between the SkyPilot Gateway Pro
“CPE” port and a standard computer DB-9 serial port, the DB-9 pinouts, and the
cable-pin correspondence.
Figure D-1. RJ-45 to DB-9 physical connectors
Figure D-2. DB-9 pins
Table D-2. RJ-45 Pin Assignments
SkyPilot Gateway/Extender
“CPE” port
Computer serial port
Signal Pin Pin Signal
TxD 3 2 RxD
GND 4 5 GND
RxD 6 3 TxD