Installation Instructions

Specifications | 51
GUI configuration SkyProvision™ software and Web interface
GUI EMS SkyPilot EMS™ software
IP address DHCP or static. 192.168.02. default
Firmware Multiple versions of firmware stored in nonvolatile memory;
updated via FTP
Configuration file XML over HTTP
QoS (Quality of Service)
Prioritization 802.1p-based; based on protocol type, IP address, port ID,
and configurable IP address list
Traffic shaping Per-device rate limits upstream and downstream
Monitoring and MIB support
Supported MIBs MIB-II (RFC 1213); EtherLike (RFC 2665); Bridge (RFC 1493);
SkyPilot private MIB
Local management RS-232 Serial Console Port
Remote management Command-line interface via Telnet, SNMP 2c, Web interface
Topology
Configurations Mesh, point-to-multipoint, point-to-point
Table C-1. SkyPilot Gateway Pro Specifications (Page 3 of 3)