Installation Instructions

28 | 5 Installing the SkyPilot Gateway Pro
Mounting
The SkyPilot Gateway Pro uses two hinged mounting brackets to allow it to be
tilted up or down slightly, as needed.
Figure 5-1. Mounted SkyPilot Gateway Pro
.
To mount the SkyPilot Gateway Pro:
IMPORTANTIt is the installer’s responsibility to verify that the support pole
and its installation method are of sufficient strength to withstand
onsite weather conditions. (The supplied mounting bracket and
screws are certified to withstand a 150 mph wind force.)
1 Attach one of the pole-clamp assemblies to the pole at the height you want
for the top of the unit. Make sure the threaded holes are facing up. Use the
long bolts in the kit.