Installation Instructions

26 | Chapter 4 Configuring the SkyPilot Gateway Pro
Configuring Adjacent SkyPilot Gateway Pros
is quite tricky....
5
For new SkyPilot Gateway
Pros, complete the
installation and power it
on.
SkyGateway/SkyExtender Installation and
Setup
6 (Optional) Log in to the
SkyPilot Gateway Pro and
configure the
management VLAN.
”The SkyPilot EMS Interface” in SkyPilot
Network Administration
7 Provision the SkyPilot
Extender(s).
The following automatic provisioning
topics in SkyPilot Network Administration:
 “Provisioning a Device”
 “Starting SkyProvision”
 “SkyProvision Display Pane”
 ”Searching for Configured Devices”
8 For DualBands, provision
the access point(s).
For information about access point
settings, refer to SkyPilot Network
Administration. For configuration
procedures, refer to the SkyPilot Web
Interface Reference
9 For new SkyPilot
Extenders, install the
device and power it on.
SkyGateway/SkyExtender Installation and
Setup
10 Provision the SkyPilot
Connector(s).
 Same as for step 7.
11 For new SkyPilot
Connectors, install the
device and power it on.
The appropriate installation manual:
 SkyConnector Indoor Installation
 SkyConnector Outdoor Installation
Table 4-3. Automatically Provisioning All Network Devices (Page 2 of 2)
Step Refer to