Installation Instructions

16 | Chapter 3 Planning Your SkyPilot Network
Preparing SkyPilot Extender Sites
If SkyPilot Extenders are required, perform a survey of possible sites before
beginning installation. For a detailed discussion of site requirements, refer to
SkyGateway/SkyExtender Installation and Setup.
For optimum service, attach SkyPilot Extenders to elevated, fixed locations with
easy and continuous access to power.
Choose an Operating Frequency
All the devices on a SkyPilot network operate on a single frequency. Before
beginning the installation, visit the deployment area and identify an optimum
operating frequency. Use a spectrum analyzer or other frequency-planning tool to
identify the best available frequency for the SkyPilot wireless network—a “clean”
center frequency that permits interference-free operation of devices.
Co-Located SkyPilot Gateway Pro Devices
If you put two of ‘em together, you.....