Installation Instructions

Required Tools and Supplies | 9
Figure 2-1. SkyPilot Gateway Pro (rear view)
Required Tools and Supplies
Before starting installation, you also need the following:
 For basic mounting:
 7/16" wrench
 9/16” wrench
 Phillips screwdriver
 Loc-tite or other thread-locking compound
 For pole mounting:
 Magnetic level
 Steel pole between 1 1/4" and 2 1/8" in diameter
 For network cabling:
 Spool of CAT-5 shielded network cable, outdoor-rated.
 RJ-45 straight through cable for a serial connection to a console (standard
CAT-5 patch cable will work)