User's Manual

SkyGateway/SkyExtender Installation And Configuration
September 2004 2-15
Checking LEDs Once power is on, the unit begins the boot process. The Link LED is green
and the Activity LED is yellow.
The LEDs operate as follows:
• State-Based Blinking:
- Slow blink = 4 Blinks per second;
- Fast blink = 16 Blinks per second.
• RSSI Based Blinking:
- RSSI = 0 blink/2Sec
- 0<RSSI<=10 blink/2Sec
- 10<RSSI<=20 blink/2Sec
- 20<RSSI 16 blink/2Sec
NOTE:If anything fails, refer to Chapter 3, Troubleshooting.
Table 2-4 : LED States
Process Link LED Activity LED
During Boot Slow Blink Slow Blink
Staggered
Boot Failed LED Off LED On
Image Inititalizing Slow Blink Slow Blink
Syncronous
Initialization Failure Initialization Failure Fast Blink
Syncronous
Initial Success but no hello LED On LED Off
Heard Hello LED Off Blink Based
On RSSI
Link preauth, non-op, or op-link Slow Blink Blink Based
On RSSI
Link Standby Fast Blink Blink Based
On RSSI
SkyExtender connected LED On LED On