User's Manual
Table Of Contents
SkyGateway/SkyExtender Installation And Configuration Guide
2-10 September 2004
Figure 2-7 Serial Weather Gasket
8. Slide the cover down over the gasket and secure the cover using the screws
provided. Make sure the Ethernet cable passes through the insert in the cover
as shown in Figure 2-8. Use the ty-wrap to further weather-proof the gasket. Cut
the excess ty-wrap off.
Figure 2-8 Serial Adapter Cover Installation
9. Secure the Ethernet cable and, if applicable, serial cable to prevent strain (par-
ticularly installations exposed to high wind conditions). Figure 2-9 shows an
example of the cable secured to the mounting pole.