User's Manual
Table Of Contents
SkyGateway/SkyExtender Installation And Configuration
September 2004 2-9
If you are not installing the optional serial connection, proceed to Step 5 and
then Step 9. If you are installing the optional serial connection, proceed to
Step 6.
5. Install the cover using the provided screws. The Ethernet cable is positioned to
pass through the insert in the cover, as shown in Figure 2-5.
Figure 2-5 Cover Installed
Installing Optional
Serial Adapter
Cover
If you are using a serial cable, do the following:
6. Thread the serial cable through the serial cable cover and slide the weather
gasket around the cable, as shown:
Figure 2-6 Connecting Serial Cable
7. Fit the weather gasket down into the unit, securely surrounding the serial port,
as shown: