User's Manual
Table Of Contents
SkyGateway/SkyExtender Installation And Configuration Guide
2-8 September 2004
Figure 2-3 below shows the Ethernet port on the right and the serial port to
the left.
Figure 2-3 Ethernet and Serial Ports
SkyGateWay
Installation
SkyGateWay installation involves connecting the unit to the backhaul by
doing the following:
1.
Installing the Ethernet cable
2.
Installing the optional serial cable.
3.
Installing the optional serial cable adapter cover
4.
Connecting the unit to the backhaul
Install Ethernet
1.
Connect the Ethernet cable and push it into the gasket, as shown in
Figure 2-4.
Figure 2-4 Install Ethernet Cable
Serial Port
Ethernet Port
Gasket
(SkyGateWay)