User's Manual
Table Of Contents
SkyGateway/SkyExtender Installation And Configuration Guide
2-6 September 2004
Mount The Unit
A mounting bracket is provided with the units. This bracket fastens to a standard
1.25-inch diameter steel pole. Any mounting system that meets local wind-loading
regulations and provides a 1.25-inch diameter by 5-inch long connecting surface will
be satisfactory. Attach the magnetic level to the pole to make sure the pole and unit
are aligned properly. The photograph below shows a possible unit installation.
Figure 2-1 Possible Unit Installation
.
WARNING
All bolts on the antenna assembly and mounting bracket must be
tightened to the proper torque specifications. The unsupported pole
length should be no greater than four feet.
!