User Manual

RES-3000-I210+ / I210+RD / I210+c

PA-0115A Rev. 1.4

March 11th, 2011 Page 4 of 6

Procedure

Note: In this procedure, the “I-210+” wording will be used for all 4 meter designations: I-210+,

I-210+RD, I-210+c & the I-210+cRD meters.

The following table represents the Trilliant SecureMesh product associated to the GE meter:

• RES-3000-I-210+ product must be installed into an I-210+ meter

• RES-3000-I-210+RD product must be installed into an I-210+RD meter.

• RES-3000-I-210+c product can be installed into an I-210+c or I-210+cRD meter.

1. If it is not already done, dis-assemble the

I-210+ meter clear cover to access the 2 post

receptacle holes in the nameplate carrier and

the I-210+ board connector as shown.

2. With the SecureMesh board in this orientation, please ensure that the antenna board is

securely held in this position and that the 2 HEX posts are properly screwed.

Board

connector

Post

receptacles

HEX Post