User's Manual

SkyPilot SkyExtender DualBand Installation and Setup Guide 51
Figure 34. Information Summary page
AP Name.
The name assigned to the access point.
Network IP Address.
The IP address of the access point, assigned by DHCP or
provided as a static address. (The default is
192.168.0.3
.)
Software Version.
The version of the software running on the access point.
Up Time.
The amount of time since the access point was last booted.
System Time.
The system date and time as set by NTP or, if not set by NTP,
January 1, 1970 plus the amount of time since the access point was last booted
(
Up Time
).
Number of WLANs.
The number of WLANs configured and enabled.
Country.
An arbitrary string specifying the physical location of the unit.
Current Clients.
The number of clients associated with the access point.
Access Point Configuration page
Clicking
Access Point
in the navigation bar takes you to the Access Point
Configuration page. Use this page to view and modify the access point’s global
configuration parameters. These parameters apply to all the wireless networks
that use the access point as a hub.