User Guide

Installation Prerequisites and Considerations
Access Point Deployment Guide 16
NOTICE: The contents of this document are proprietary and confidential and the property of Trilliant Holdings, Inc.,
its subsidiaries, affiliates, and/or licensors. This document is provided subject to the confidentiality obligations set
forth in the agreement between your company and Trilliant. The contents may not be used or disclosed without the
express written consent of Trilliant.
• Landlord contact information
• AP power type, commercial power, solar solution or
other
• Specific landlord requirements
• Distance to available power
• Latitude
• Longitude
• Site type (building, tower, pole, or other)
• Photos of site including antennal location, AP
location, and the overall site
• Height of existing structure
• Other site-specific information
• AP and equipment mounting locations
AP Installation Configuration
The AP installation configuration should be documented and provided to the installer prior to the
start of the installation. See “Error! Reference source not found.” on page Error! Bookmark
not defined. for an AP Installation Configuration Worksheet template.
This worksheet provides the following site-specific equipment details and AP configuration
information:
• Site name
• AP antenna gain
• AP ID
• AP antenna downtilt, if required
• Deployment Region ID
• AP antenna cable type
• AP physical configuration (outdoor, indoor, and base
station type)
• AP antenna cable length
• Power source (120/240 VAC, 48 VDC, or Solar)
• AP antenna cable loss
• GPS antenna model
• GPS cable type
• AP antenna manufacturer
• GPS cable length
• AP antenna model
• Default router
• Backhaul type
• DNS servers
• Backhaul equipment location
• NTP servers
• Backhaul configuration information
• Client or server mode of operation
• AP and other equipment installation location
• Gateway hostname or IP address