User's Manual

www.trilithic.com
www.trilithic.com
Page II-26
802 AWE Operation Manual
Advanced Wireless Test Set
Sleep Mode Delay
The Sleep Mode Delay setting is used to conserve
power by automatically enabling the sleep mode
after the 802 AWE has been idle for a specied
period of time.
The default setting for the sleep mode delay is 5
Minutes. The sleep mode delay can be set from a
minimum of one (1) minute up to a maximum of 60
minutes.
Use either of the following methods to change the
sleep mode delay:
• Use the up/down arrow buttons to change
the value in one (1) minute increments.
• Press the Enter button and use the Virtual
Keyboard to directly enter the sleep mode
delay as shown in the image to the right.
Quickly Press the Power button to awaken the
802 AWE from sleep mode. The sleep mode delay
timer will automatically restart.
Whenever the 802 AWE is being powered by the AC to DC
power adapter & battery charger, the sleep mode delay will be
deactivated automatically.